CHJJH - WAYTAC OIL 220
- MSDS: CHJJH
- Manufacturer: AMOCO OIL CO
- Product Name: WAYTAC OIL 220
- National Stock Number: 9150-00N086252
Product Identification
Product ID:WAYTAC OIL 220
MSDS Date:06/17/1985
FSC:9150
NIIN:00N086252
MSDS Number: CHJJH
Responsible Party
CHICAGO, IL 60601
US
Emergency Phone: 312-856-5371;800-424-9300(CHEMTREC)
Info Phone: 312-856-3907
Preparer: STEPHEN A ELBERT
Cage: 15958
Contractor
Telephone: 800 447-8735
Cage: 15958
Ingredients
MINERAL OIL, PETROLEUM DISTILLATES,HYDROTREATED
CAS: 64742-54-7
RTECS: PY8035501
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
MINERAL OIL, SOLVENT REVFINED HEAVY PARAFFINIC, SEVERELY
CAS: 64741-88-4
RTECS: PY8040501
OSHA PEL N/K
ACGIH TLV: N/K
SOLVENT REFINED RESIDUM
CAS: 64742-01-4
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:LD50: (ORAL,RAT) >10 G/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: NO SIGNIFICANT IRRITATION
EXPECTED. SKIN: NONE EXPECTED FOR SINGLE SHORT-TERM EXPOSURES.
PROLONGED OR REPEATED CONTACT MAY PRODUCE SOME IRRITATION. INHAL:
NONE EXPECTED UNDER NORMAL CONDIT IONS OF USE. INGEST: EXPECTED TO
BE RELATIVELY NON-TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . EYE: FLUSH
WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. INGEST: IF LAR GE
AMOUNT IS SWALLOWED, INDUCE VOMITING. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:COC
Flash Point:440F,227C
Extinguishing Media:AGENTS APPRVD FOR CLASS B HAZARDS (E.G., DRY
CHEMICAL, CARBON DIOXIDE, HALOGENATED AGENTS, FOAM, STEAM) OR WATER
FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:TREAT AS AN OIL SPILL. CONTAIN AND REMOVE BY
MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.
Other Precautions:AVOID STRONG OXIDIZERS.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:0.89 (WATER =1)
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NEGLIGIBLE, <0.1%
Appearance and Odor:RED, TACKY LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:ENCLOSED-CONTROLLED INCINERATION IS RECOMMENDED
UNLESS DIRECTED OTHERWISE BY APPLICABLE ORDINANCES. DISPOSAL MUST
BE I/A/W FEDERAL, STATE & LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.